The ladle roaster is a common equipment for baking molten iron ladle. The baking bag is usually composed of a cover, a nozzle, a gas pipe and a gas conveying device. The cover covers the Mantou, and the gas pipeline transports the gas. The gas and combustion gas are mixed and sprayed out from the nozzle to bake the Mantou. However, the support strength of the existing bag roaster cover is relatively low. When the amount of gas injected is large, it will have a large negative impact on the cover of thebag roaster, thus affecting the baking efficiency and quality. Therefore, in view of the above shortcomings, how to provide a method to improve the stability of the internal connection covering the body Beck buffered the vibration of the cover and affected the body when generating a large amount of injected heat is an urgent technical problem for the technicians to solve on site


In order to overcome the shortcomings of the existing technology, this technology provides a new type ofbaker that can improve the heating efficiency better and more stably. In order to achieve the above purpose, it uses the following technical solutions to achieve: a heating and baking, including support, fan, support plate, beam, cover, air mixing chamber, support beam, connecting beam and other components; Wherein, the fan is fixed on a bracket, and the bracket is provided with an air supply port and an air supply outlet, and the fan is connected with the air supply port through a pipe; The gas mixing chamber is fixedly arranged on the cover body and connected with the bottom of the cover body. The gas mixing chamber comprises an air inlet and a fuel inlet; The cover body is provided with an accommodation chamber for containing rock wool; The insulation chamber comprises a first insulation chamber and a second insulation chamber connected with the first insulation chamber, and the second insulation chamber is located on both sides of the first insulation chamber; The air inlet pipe and the air inlet pipe are fixed on the top of the cover body and connected with the insulation chamber; The connecting base is fixedly arranged on the cover body, and the connecting base is rectangular; The support rib is fixedly connected on the connection base and extends along the second cavity, and the inner wall of the first cavity is provided with an arc protrusion extending towards the center of the first cavity; The inner wall of the second cavity is provided with an anti-slip pad. The inner wall of the second cavity is provided with an anti-skid pad. The support plate is fixed on the support, and two transverse frames are set parallel along the horizontal direction, the two ends of the transverse frame are fixed on the support plate, and the other two transverse frames are connected with the transverse frame and the support plate between the connecting beams, connecting and supporting rods; The two ends of the support beam are fixedly connected on two transverse frames arranged in parallel with each other; A bracket is fixedly installed on the top of the cover body, and a connecting plate is fixedly installed on the top of the bracket, and the connecting plate is fixedly installed along the length direction of the horizontal frame. The two ends of the transverse frame are vertically connected with the support plate. The support rod is arranged in an inclined direction, and the two ends of the support rod are respectively connected to the support plate and the horizontal frame. The support beam and connecting beam are set parallel to each other and perpendicular to the horizontal frame

Compared with the relevant technology, the advantages of this bakery are: the support strength that can be improved by optimizing the design, connecting beams and supporting beams set on the equipment. The horizontal frame is used to repair the connecting cover body, and the top cover body is connected to the horizontal frame. Through the support and connecting plate, the connecting strength of the cover body and the horizontal frame can be improved, so that the equipment is more stable; And the support rod group can prevent the large deflection deformation of the horizontal frame, ensure the reverse impact on the horizontal frame and the cover when a large amount of gas is sprayed into the cover, and improve the heating efficiency of thebaker< br/>